Do a Cordless Drill Comparison Before Buying a Drill Driver As a Gift

I want to give a cordless drill driver as a present. Before buying the new tool I will do a cordless drill comparison to make sure the recipient gets a drill driver that meets his needs. I have been looking at cordless power tool combo kits and saw that one of the major differences in cordless drill drivers is the battery. I decided that the first part of my cordless drill comparison would be to take as look at what makes a lithium ion (Li-ion) battery different than a Nicad battery.

18 Volt Saw

For this cordless drill comparison I decided that the chemical properties weren't important to me. What mattered was why an Li-ion battery may be better than a nicad battery. My drill comparison came up with 2 major reasons. Li-ion batteries weight is about half that of a nicad battery. In other words when you hold a 18 volt lithium ion powered cordless drill driver over your head you will notice a major difference in the weight over that of a 18 volt nicad drill driver.

18 Volt Saw

This cordless driver comparison showed that Lithium-ion batteries hold a charge a lot longer than a nicad battery. A fully charged Lithium-ion batteries can hold a charge for up to a year. My cordless driver comparison did clarify to me that when comparing drivers its important to compare cordless drivers with similar power. Power wise a 12 volt Nicad battery has the same power as a 12 volt Lithium ion battery and a 18 volt nicad battery has the same power as a 18 volt Li-ion battery. So don't expect the same torque found in a 18 volt nicad cordless drver from a new 12 volt li-ion cordless driver.

My drill comparison showed many drills are now listed as drill drivers instead of just a cordless drill. Cordless drivers have a clutch. The clutch controls the amount of torque applied. When the preset resistance has been reached It disengages the drill driver's drive shaft making a clicking sound. By setting the clutch correctly you won't strip a screw or overdrive it once it's snug. So its important to pay attention to the clutch settings so you are able to take advantage of clutch and not strip the screws. Also, part of my cordless driver comparison is also to check the number of clutch settings each drill driver has.

My cordless driver comparison also revealed that most cordless drill drivers have keyless chucks that are tightened by hand, no chuck key to loose. Keyless chucks are usually 3/8 inch or 1/2 inch. This drill comparison also revealed some consumer level cordless drill drivers have keyless chucks that only take quick connect bits. So since I'm buying the cordless driver as a gift I'm making sure what type of bits the recipient uses.

I concluded through this cordless drill comparison that the most important feature to consider is how the drill feels in your hand. Does the drill point straight ahead without tipping up or down? Is it too heavy working overhead? Since the drill I'm buying is a gift I'm checking return policies before I buy, especially if I'm buying online.

Besides helping me discover what cordless drill to buy as a gift, my cordless driver comparison helped me to better understand my tool. I now know how and why to use the clutch settings and am now taking the time to set it correctly.

Do a Cordless Drill Comparison Before Buying a Drill Driver As a Gift
18 Volt Saw

Special Price!!! Black & Decker CCS818B 18-Volt Cordless Chain Saw Bare Tool (Battery and Charger Not Included)

Black & Decker CCS818B 18-Volt Cordless Chain Saw Bare Tool (Battery and Charger Not Included)
Click for larger image and other views

Black & Decker CCS818B 18-Volt Cordless Chain Saw Bare Tool (Battery and Charger Not Included)

>> Click here to update Cheapest prices for Black & Decker CCS818B 18-Volt Cordless Chain Saw Bare Tool (Battery and Charger Not Included) <<

Black & Decker CCS818B 18-Volt Cordless Chain Saw Bare Tool (Battery and Charger Not Included) Feature

  • Handles both soft and hard wood measuring up to eight inches in diameter
  • Makes up to 150 1-1/2-inch diameter cuts on a single charge
  • Lightweight, efficient, and comfortable to hold
  • Weighs 9.5 pounds; 2-year warranty
  • Requires 18V Black & Decker rechargeable battery and charger (not included)


Black & Decker CCS818B 18-Volt Cordless Chain Saw Bare Tool (Battery and Charger Not Included) Overview

Get the freedom of portable cutting power without the hassles of gas. Cut though logs and branches up to 8-inches in diameter, chop up pruning waste, or use the cordless chain saw to clear fallen debris and limbs after a storm. The cordless chain saw provides a convenient powerful alternative to the hassles of gas. Most gas powered chain saws are heavy and cumbersome. You have fumes and spillage when refueling and breathing exhaust when cutting. Gas engines also require frequent tune-ups. At just 6.2 pounds, the cordless chain saw is lightweight and portable, yet its powerful motor will breeze through tough backyard cutting jobs. powered by an 18-volt rechargeable battery (not included), the cordless chain saw will make up to 150 1-1/2-inch diameter cuts on just one charge. The cordless chain saw features a low-kickback 8-inch bar and chain. An on board oiling feature keeps the chain oiled hassle free. Just fill the oil chamber and after every cut just push a button twice to oil the blade. This prevents for smoother cuts and a longer lasting bar and chain. A window lets you know how much oil remains. The cordless chain saw is designed for a comfortable cutting experience. A wrap around handle provides multiple gripping positions to make both straight and side cuts. A soft grip pad on the handle provides maximum comfort.

Black & Decker CCS818B 18-Volt Cordless Chain Saw Bare Tool (Battery and Charger Not Included) Specifications

Lightweight, easy-to-operate, and able to get into even the tightest areas with ease, this cordless electric chain saw from Black & Decker handles both soft and hard wood measuring up to eight inches in diameter. Powered by one 18-volt battery (not included), the #CCS818B is ideal for general yard work, pruning trees, or helping to clear fallen branches. On a single charge, this saw can make up to 150 1-1/2-inch diameter cuts, so you can get more done in less time. It also features an on-board oiling system to keep the chain working properly, and a convenient window lets you easily see whether or not more oil is need. Additionally, a wrap-around handle lets you put the saw in the proper position for straight and side cuts, while a comfy grip pad keeps you going longer. The #CCS818B comes with a guide bar scabbard to protect the blade when not in use, and an on-board hex wrench.

SAVE NOW on the special offers below!

Available In Stock.

This Black & Decker CCS818B 18-Volt Cordless Chain Saw Bare Tool (Battery and Charger Not Included) ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Black & Decker CCS818B 18-Volt Cordless Chain Saw Bare Tool (Battery and Charger Not Included)

Limited Offer Today!! Black & Decker CCS818B 18-Volt Cordless Chain Saw Bare Tool (Battery and Charger Not Included) Black Friday and Cyber Monday Deals

Dvd Home Theater

Can a 14.4 Volt Cordless Drill Pilot Holes Into Cinderblock Walls?

I thought this would be an interesting question to talk about today. I got this question while surfing the net and it looked like a question that needed a little explanation.

18 Volt Saw

This is a very common activity, especially for those who have basement and want to hang pictures or even hang and entire wall. In any case there was to be a way to drill holes to secure objects to the wall. So, can a 14.4 volt cordless drill put pilot holes into a concrete center block? The answer may surprise you or maybe not. Yes or no, in some cases it can be done. But you many need to get a little help.

18 Volt Saw

One way to do this is to purchase a masonry drill kit. Masonry drill bits are cast to endure more vigorous drilling activities. They also have a different cutting tip that helps endure the heat that comes from grinding against concrete. Do not get the cheap set though. I tried one of these sets and the bit still cracked on me. I wanted to take it back but it was a gift and I could not find the receipt. That is a different story. Invest in your tools and they will take care of you when you need them.

You will know very soon if you can drill through a cinderblock with you cordless drill. If you see that the drilling is not going anywhere than you know you need to get another drill. If you do see results with your 14.4 volt cordless drill than expect that it will take a lot more time than usual. Also expect that you may have to recharge your battery a number of times to finish the job. So, it may be a good idea to have a second rechargeable battery on hand just in case you need it. The next choice would be to purchase a cordless hammer drill.

Now, cordless hammer drills are a little different. They spin a special bit in a circular motion but they also hammer down on the bit to push it through a cement center block. A hammer cordless drill should make short work of a cinderblock wall.

Yes, it is possible to drill into a cinderblock with a 14.4 volt cordless drill but you need the right tools and a lot of extra time.

Can a 14.4 Volt Cordless Drill Pilot Holes Into Cinderblock Walls?
18 Volt Saw

Special Price!!! DeWALT DC385K 18-Volt Ni-Cad Cordless Reciprocating Saw Kit

DeWALT DC385K 18-Volt Ni-Cad Cordless Reciprocating Saw Kit
Click for larger image and other views

DeWALT DC385K 18-Volt Ni-Cad Cordless Reciprocating Saw Kit

>> Click here to update Cheapest prices for DeWALT DC385K 18-Volt Ni-Cad Cordless Reciprocating Saw Kit <<

DeWALT DC385K 18-Volt Ni-Cad Cordless Reciprocating Saw Kit Feature

  • Lever-action keyless blade clamp for quick and easy blade changes and 4-positions for flush cutting
  • 1-1/8-inch stroke length and 0-3,000 strokes per minute for faster cutting speed; pivoting shoe for comfort
  • high-capacity XRP battery offer 40% more run-time than standard batteries
  • Includes saw, battery, 1-hour charger, kit box
  • 8.2 pounds; 90-day money back guarantee, 1-year free service contract, 3-year limited warranty


DeWALT DC385K 18-Volt Ni-Cad Cordless Reciprocating Saw Kit Overview

The DEWALT 18-Volt Cordless XRP Ni-Cad Reciprocating Saw Kit will help you make quick work of demolition tasks involved in renovations and remodels. Featuring variable-speed trigger, and a powerful DEWALT XRP extended run-time battery system, this saw is built for control and power. The kit includes a quick one-hour charger, 18 volt XRP battery, and handy carrying kit box so you can recharge and be back at it in no time.

callout box top
18-Volt Cordless XRP Reciprocating Saw Kit
At a Glance:
  • Variable-speed control delivers 0 to 3,000 spm for accuracy

  • Extended 1-1/8-inch stroke length for faster cuts<

  • Balanced, lightweight design with comfort grip

  • Fast, keyless blade changes

  • Reduced downtime with 18-volt XRP extended run-time battery

  • Three-year limited warranty, one-year free service, and 90-day money-back guarantee
callout box bottom
DEWALT 18-Volt Cordless XRP Ni-Cad Reciprocating Saw Kit

Take on renovation and remodeling projects with this powerful reciprocating saw.
View larger.

DEWALT 18-Volt Cordless XRP Ni-Cad Reciprocating Saw Kit

Variable-speed saw blade delivers
3,000 spm, ideal for framing jobs.
View larger.
Variable-Speed Control for Fast, Accurate Cuts
A reciprocation saw mimics the back-and-forth motion of a handsaw that lets you quickly cut through wood framing, shingles, PVC pipes, and more. Plus a reciprocating saw fits into places where other saws can't go, making it a truly versatile addition to your professional tool kit.

A DEWALT cordless reciprocating saw helps you capitalize on all those benefits, thanks to the fast cutting speeds allowed by its powerful, 18-volt motor and big 1-1/8-inch stroke length. This saw offers variable-speed control for application-specific performance, and it is capable of operating at speeds ranging from 0 to 3,000 spm. When you're finished with a cut, the saw's electric brake stops the blade quickly and reliably.

3-position adjustable shoe
Three-position
adjustable shoe.
Versatile, Convenient Blade Clamp and Shoe Design
For versatility, the saw's four-position blade clamp allows you to choose the configuration that best matches your application, and the blade clamp is reinforced with metal for long-term durability. This setup gives you the ability to make flush cuts and the ability to reverse the blade for cutting upside-down, and--regardless of which configuration you're using--the saw's pivoting, open-top shoe makes it easy to see what you're working on. The three-position shoe also makes adjusting cut depth easy and helps extend blade life.

Fast, Keyless Blade Changes
When it comes time to switch to a different type of blade or replace a blade with a fresh one, the keyless lever-action blade-clamp design allows for fast, easy blade changes--no special tools required.

Comfort Grip and Long Battery Life
Since comfortable handling contributes to better control and accurate cuts, this saw weighs an easy-to-maneuver 8.2 pounds and features a textured, anti-slip grip. The variable speed trigger provides consistent performance and improved user control in extended use situations.

A tool's only useful if it runs long enough to get the job done, and DEWALT XRP extended run-time batteries keep this reciprocating saw running at full tilt. They provide up to 40 percent more run-time than standard batteries, and any XRP battery can be used with any 18-volt DEWALT tool, which allows you to streamline your kit. In addition, the one-hour charger helps reduce downtime so you can get your task done quickly.

This 18-volt cordless XRP reciprocating saw kit also comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money back guarantee.

What's in the Box
DC385K DEWALT 18-Volt Cordless XRP Reciprocating Saw, one-hour Ni-Cad charger, 18-volt XRP battery, and kit box.


4 position blade change
Four-position blade change.
keyless blade change lever
Keyless blade-change lever.





SAVE NOW on the special offers below!

Available In Stock.

This DeWALT DC385K 18-Volt Ni-Cad Cordless Reciprocating Saw Kit ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

DeWALT DC385K 18-Volt Ni-Cad Cordless Reciprocating Saw Kit

Limited Offer Today!! DeWALT DC385K 18-Volt Ni-Cad Cordless Reciprocating Saw Kit Black Friday and Cyber Monday Deals

Makita Cordless Saw

Bare-Tool Milwaukee 2630-20 Bare-Tool 18-Volt 6-1/2-Inch Circular Saw (Tool Only, No Battery)

Special Price!!! Bare-Tool Milwaukee 2630-20 Bare-Tool 18-Volt 6-1/2-Inch Circular Saw (Tool Only, No Battery)

Bare-Tool Milwaukee 2630-20 Bare-Tool 18-Volt 6-1/2-Inch Circular Saw (Tool Only, No Battery)
Click for larger image and other views

Bare-Tool Milwaukee 2630-20 Bare-Tool 18-Volt 6-1/2-Inch Circular Saw (Tool Only, No Battery)

>> Click here to update Cheapest prices for Bare-Tool Milwaukee 2630-20 Bare-Tool 18-Volt 6-1/2-Inch Circular Saw (Tool Only, No Battery) <<

Bare-Tool Milwaukee 2630-20 Bare-Tool 18-Volt 6-1/2-Inch Circular Saw (Tool Only, No Battery) Feature

  • Heavy-Duty Magnesium Guards for maximum durability and On-board fuel gauge displays remaining battery charge
  • Ergonomic, compact and lightweight design with soft-grip handle for operator comfort
  • Electronic brake stops blade quickly and Aircraft aluminum shoe provides greater accuracy
  • Includes: 18-Volt XC Circular Saw, 24T Carbide Blade


Bare-Tool Milwaukee 2630-20 Bare-Tool 18-Volt 6-1/2-Inch Circular Saw (Tool Only, No Battery) Overview

2630-20 Model Code: AB (part# 2630-20) This item features: -Aircraft aluminum shoe provides greater accuracy. -Electronic brake stops blade quickly. -Ergonomic, compact and lightweight design with soft-grip handle for operator comfort. -Heavy-duty magnesium guards for maximum durability. -On-board fuel gauge displays remaining battery charge. -Voltage: 18.00 V. -Batt. Cap.: 2.800 A-h. -Batt. Type: Lithium-Ion. -Blade Diam: 6 1/2 in. -Speed: 3500 rpm. -Arbor Diam: 5/8 in. -Cutting Cap.: 2 1/8 in (90 crosscut) [Max], 1 9/16 in (45 bevel) [Max]. -Bevel Cap.: 50 [Max]. -Control Type: On/Off. -Handle Type: Top D-Handle/Top Palm. -Price is for 1 Each. Model Code  Model Description AAIncludes:1-Hour Charger, Contractor Bag, Rip Fence Guide, (2) XC Batteries, Framing Blade ABIncludes:Rip Fence Guide



SAVE NOW on the special offers below!

Available In Stock.

This Bare-Tool Milwaukee 2630-20 Bare-Tool 18-Volt 6-1/2-Inch Circular Saw (Tool Only, No Battery) ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Bare-Tool Milwaukee 2630-20 Bare-Tool 18-Volt 6-1/2-Inch Circular Saw (Tool Only, No Battery)

Limited Offer Today!! Bare-Tool Milwaukee 2630-20 Bare-Tool 18-Volt 6-1/2-Inch Circular Saw (Tool Only, No Battery) Black Friday and Cyber Monday Deals

Cast Iron Griddle Dewalt 1 2 Drill First Aid Kit

Bare-Tool Milwaukee 2645-20 18-Volt M18 Jig Saw

Special Price!!! Bare-Tool Milwaukee 2645-20 18-Volt M18 Jig Saw

Bare-Tool Milwaukee 2645-20 18-Volt M18 Jig Saw
Click for larger image and other views

Bare-Tool Milwaukee 2645-20 18-Volt M18 Jig Saw

>> Click here to update Cheapest prices for Bare-Tool Milwaukee 2645-20 18-Volt M18 Jig Saw <<

Bare-Tool Milwaukee 2645-20 18-Volt M18 Jig Saw Feature

  • Tool free shoe bevel with positive stops - allows for quick and accurate shoe adjustment. The tool free shoe bevel with positive stops allows for a maximum 45-Degree bevel in either direction with detents at 0, 15, 30 and 45-Degree
  • Position orbital cutting -Milwaukee 5-position orbital cutting offers the most versatility for application specific cutting than any cordless jig saw on the market
  • Over-molded grip with variable speed trigger - provides optimal control for cutting a variety of materials
  • Non-marring shoe - protects the work surface from damage
  • Quik-lok blade clamp - provides fast and easy keyless blade change


Bare-Tool Milwaukee 2645-20 18-Volt M18 Jig Saw Overview

The 2645 20 delivers accuracy, versatility, and ease of use. The 5 position orbital setting offers more cutting versatility than any other cordless jig saw on the market. This allows the user to select the type of cut or speed specific to their applications. For ease of use, the tool free shoe bevel allows for quick an accurate shoe adjustments, while the Quick Lok blade clamp (model No. 153) provides fast and easy blade change.



SAVE NOW on the special offers below!

Available In Stock.

This Bare-Tool Milwaukee 2645-20 18-Volt M18 Jig Saw ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Bare-Tool Milwaukee 2645-20 18-Volt M18 Jig Saw

Limited Offer Today!! Bare-Tool Milwaukee 2645-20 18-Volt M18 Jig Saw Black Friday and Cyber Monday Deals

Diet Bar

Craftsman 12 Volt NEXTEC Multi-Tool Model 09-17438 Review

I bought the Craftsman 12-Volt NEXTEC Multi-Tool two months ago to test out and review.

18 Volt Saw

Nextec Multi-Tool

18 Volt Saw

I used the circular saw blade to trim a 1 X 6 out in the yard. I used the flush blade to cut the bottom of a door jamb so I could install tile in the bathroom. I used the carbide blade to clean out the grout so I could replace a 6 X 6 tile that I put in wrong. I used the scraper blade to remove some double sided tape so I could put in a new door weather seal. I used the sanding pad to sand a leg on an adirondack chair before I painted it. I used the rasp to change the angle on a chair leg brace.

I did all this without dragging out a cord, a sander, an angle grinder, a wood file, a putty knife, a circular saw or a hammer and chisel. I did all of these tasks easily and in a lot less time than it would normally take. I did all these tasks with just one tool!

There are a lot of similar multi-tools on the market. The Craftsman Multi-Tool is not the first and it is not the best, but it is the best value at only . And it's cordless! It is similar to the Bosch PS-50, Fein Multimaster, and Dremel Multi-Max. The Craftsman multi-tool is like the others and is even compatible with the Fein accessories but it's a lithium-ion cordless multi-tool for only (The Dremel Multi-Max is corded for ). And as a bonus, like the Fein Multimaster, it comes with an integrated dust bypass vacuum adapter so you can hook it up to your shop vac or dust collection system.

I don't consider the Craftsman Multi-tool as a heavy-duty tool. In fact the tool will get hot around the battery area if you use it on too large a task (3 to 4 batteries in a row.) It is just a great tool for those special small to medium jobs around the house that I have all the time. It is a great "around the house" tool. If you need a tool like this to work for you all day long or have a large project like scraping an entire house before painting you really should buy a heavier tool like the Fein Multi-Master.

NEXTEC Multi-Tool Features:

The Craftsman 12-Volt NEXTEC Multi-Tool comes in a handy carrying case along with a 30 minute quick charger and six attachments. The Multi-Tool is powered by a 12-volt Lithium-Ion battery.

Some of the key features of this tool are:

15000 OPM/ 2.8 oscillation angle
LED work light
includes 6 accessories (blades and sanders)
Soft-grip Handle
Compact Ergonomic design
Integrated dust bypass with vacuum adapter
Powerful, compact motor
Secure accessory mount
Powered by 12 Volt Lithium-Ion battery
30-minute quick charger with LED charge indicator:

Quickly charges the battery and features a charge indicator that visually indicates the charging status.

Compact ergonomic design: ultra compact for use in tight spaces Lithium-Ion Power: Lighter weight, better performance and longer shelf life.

Weight: 1.8 lbs with battery Accessories I recommend buying an extra battery.

If you already own an Craftsman Auto Hammer or any of the NEXTEC Line you already have a spare. You can order spare battery and blades through ToolBoxHero (see link below)

Final Thoughts:

The Craftsman 12-Volt NEXTEC Multi-Tool performed very well when using it the way it's meant to be used. This tool is not a replacement for the heavy-duty plug in versions like the Fein Multimaster. It is a great cordless multi-tool that will work very well around the house. The price really makes the Craftsman Multi-Tool shine!

Craftsman 12 Volt NEXTEC Multi-Tool Model 09-17438 Review
18 Volt Saw

Special Price!!! Bare-Tool Hitachi CR18DLP4 18-Volt Lithium-Ion Reciprocating Saw (Tool Only, No Battery)

Bare-Tool Hitachi CR18DLP4 18-Volt Lithium-Ion Reciprocating Saw (Tool Only, No Battery)
Click for larger image and other views

Bare-Tool Hitachi CR18DLP4 18-Volt Lithium-Ion Reciprocating Saw (Tool Only, No Battery)

>> Click here to update Cheapest prices for Bare-Tool Hitachi CR18DLP4 18-Volt Lithium-Ion Reciprocating Saw (Tool Only, No Battery) <<

Bare-Tool Hitachi CR18DLP4 18-Volt Lithium-Ion Reciprocating Saw (Tool Only, No Battery) Feature

  • Tool body compatible with all Hitachi Lithium Ion, NiCd and NiMH 18V batteries
  • Constructed with triple seal design to protect from dust an debris generated during use- also protects from water waste when cutting into pipes
  • Ergonomic shape and slip/heat resistant grip for comfortable operation over extended periods of time
  • Tool-less blade changing system for quick replacements and reduced downtime
  • Foot adjustment for depth-of-cut control and extended blade life


Bare-Tool Hitachi CR18DLP4 18-Volt Lithium-Ion Reciprocating Saw (Tool Only, No Battery) Overview

Tool body compatible with all Hitachi Lithium Ion, NiCd and NiMH 18V post-style batteries Constructed with triple seal design to protect from dust an debris generated during use- also protects from water waste when cutting into pipes Ergonomic shape and slip/heat resistant grip for comfortable operation over extended periods of time Fan cooled motor for optimum speed and added durability Replaceable carbon brushes for longer tool life Tool-less blade changing system for quick replacements and reduced downtime Foot adjustment for depth-of-cut control and extended blade life Reversible blade setting for reverse cutting



SAVE NOW on the special offers below!

Available In Stock.

This Bare-Tool Hitachi CR18DLP4 18-Volt Lithium-Ion Reciprocating Saw (Tool Only, No Battery) ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Bare-Tool Hitachi CR18DLP4 18-Volt Lithium-Ion Reciprocating Saw (Tool Only, No Battery)

Limited Offer Today!! Bare-Tool Hitachi CR18DLP4 18-Volt Lithium-Ion Reciprocating Saw (Tool Only, No Battery) Black Friday and Cyber Monday Deals

Black & Decker HPB18-OPE 18-Volt Slide Pack Battery For 18-Volt Outdoor Cordless Power Tools

Special Price!!! Black & Decker HPB18-OPE 18-Volt Slide Pack Battery For 18-Volt Outdoor Cordless Power Tools

Black & Decker HPB18-OPE 18-Volt Slide Pack Battery For 18-Volt Outdoor Cordless Power Tools
Click for larger image and other views

Black & Decker HPB18-OPE 18-Volt Slide Pack Battery For 18-Volt Outdoor Cordless Power Tools

>> Click here to update Cheapest prices for Black & Decker HPB18-OPE 18-Volt Slide Pack Battery For 18-Volt Outdoor Cordless Power Tools <<

Black & Decker HPB18-OPE 18-Volt Slide Pack Battery For 18-Volt Outdoor Cordless Power Tools Feature

  • Compatible with models NST2018, NST2118, NST1810, NHT518, NS118, NPP2018, NPT318, CCS818, CCC3000, GC818.
  • Easy to install and remove
  • Powers your yard tools for efficient, wireless operation
  • Weighs 1.7 pounds
  • Includes a 2-year warranty


Black & Decker HPB18-OPE 18-Volt Slide Pack Battery For 18-Volt Outdoor Cordless Power Tools Overview

18V slide battery pack for use with all Black & Decker 18V outdoor power tools; for interchangeable convenience and value.

Black & Decker HPB18-OPE 18-Volt Slide Pack Battery For 18-Volt Outdoor Cordless Power Tools Specifications

Compatible with Black & Decker models NST2018, NST1810, NHT518, NS118, NPP2018, NPT3118, this powerful 18-volt battery lets you complete all your yard clean-up jobs without the mess and stress of wires. Longlasting, reliable, and a snap to both install and remove, the HPB18-OPE is ready to go when you are. For added peace of mind, it also comes with a 2-year warranty.

SAVE NOW on the special offers below!

Available In Stock.

This Black & Decker HPB18-OPE 18-Volt Slide Pack Battery For 18-Volt Outdoor Cordless Power Tools ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Black & Decker HPB18-OPE 18-Volt Slide Pack Battery For 18-Volt Outdoor Cordless Power Tools

Limited Offer Today!! Black & Decker HPB18-OPE 18-Volt Slide Pack Battery For 18-Volt Outdoor Cordless Power Tools Black Friday and Cyber Monday Deals

The Black &amp; Decker NPP2018 18-Volt Cordless Electric Pole Chain Saw - A Review

When I first got my hands on the Black & Decker NPP2018 18-Volt Cordless Electric Pole Chain Saw I jumped to a few conclusions. The first, there is no way that a cordless electric pole chainsaw will have the power to chop through the tree limbs I had set up for it. The second, This chainsaw is going to be heavy and uncomfortable. The third thing I thought was that this electric chainsaw will be broken before my review day was over. Well, I was pleasantly surprised with this little guy!

18 Volt Saw

Lets discuss the power of the Black & Decker NPP2018 18-Volt Cordless Electric Pole Chain Saw. It comes uses a 18 - volt Nicad battery to power the 8 inch cutting bar. I followed the instructions and made sure the battery was fully charged first. Then I took it to work. I had a lot to cut and I was really trying to test the limits of this chainsaw. I got through about 30 limbs that ranged between 1 inch and 3 inches before the battery started showing any signs of letting up. At no point did the saw seem to be strained or working over time. It just kept powering away.

18 Volt Saw

Now on to the weight of the saw. It can extend to 14 feet and it is listed as weighing 7.6 pounds. The heaviest part is by far the battery which is good because that's usually at the base when you are working with it. The saw did not become flimsy as I expected when it was fully extended. The motor near the top of the saw is not overly heavy and it does not get in the way either. I think the fact that this day was close to 90 degrees made it seem a little heavier to me but yard work is yard work.

The Black & Decker NPP2018 18-Volt Cordless Electric Pole Chain Saw turned out to be a lot more durable that I had originally expected. After it was doing so well with the limbs I was cutting I tried to push it a little. I found a big branch that needed to come down. This was about 4 and a half inches. This was the only time that the saw ran into some trouble. Like I said I was pushing this electric chainsaw to its limits.

Overall, the Black and Decker electric pole chainsaw far exceeded my expectations. The one thing I did not like was feeling a little bit of a lack of control when cutting in fully extended mode. This could have been my fault though. Everything else this saw claims it can do was not fluff at all. If you have a few small to medium sized tree limbs that need pruning this electric chainsaw is the perfect addition to your garage.

The Black & Decker NPP2018 18-Volt Cordless Electric Pole Chain Saw - A Review
18 Volt Saw

Black & Decker HPB18-OPE 18-Volt Slide Pack Battery For 18-Volt Outdoor Cordless Power Tools
Click for larger image and other views

Black & Decker HPB18-OPE 18-Volt Slide Pack Battery For 18-Volt Outdoor Cordless Power Tools

>> Click here to update Cheapest prices for Black & Decker HPB18-OPE 18-Volt Slide Pack Battery For 18-Volt Outdoor Cordless Power Tools <<

Black & Decker HPB18-OPE 18-Volt Slide Pack Battery For 18-Volt Outdoor Cordless Power Tools Feature

  • Compatible with models NST2018, NST2118, NST1810, NHT518, NS118, NPP2018, NPT318, CCS818, CCC3000, GC818.
  • Easy to install and remove
  • Powers your yard tools for efficient, wireless operation
  • Weighs 1.7 pounds
  • Includes a 2-year warranty


Black & Decker HPB18-OPE 18-Volt Slide Pack Battery For 18-Volt Outdoor Cordless Power Tools Overview

18V slide battery pack for use with all Black & Decker 18V outdoor power tools; for interchangeable convenience and value.

Black & Decker HPB18-OPE 18-Volt Slide Pack Battery For 18-Volt Outdoor Cordless Power Tools Specifications

Compatible with Black & Decker models NST2018, NST1810, NHT518, NS118, NPP2018, NPT3118, this powerful 18-volt battery lets you complete all your yard clean-up jobs without the mess and stress of wires. Longlasting, reliable, and a snap to both install and remove, the HPB18-OPE is ready to go when you are. For added peace of mind, it also comes with a 2-year warranty.

SAVE NOW on the special offers below!

Available In Stock.

This Black & Decker HPB18-OPE 18-Volt Slide Pack Battery For 18-Volt Outdoor Cordless Power Tools ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Black & Decker HPB18-OPE 18-Volt Slide Pack Battery For 18-Volt Outdoor Cordless Power Tools

Limited Offer Today!! Black & Decker HPB18-OPE 18-Volt Slide Pack Battery For 18-Volt Outdoor Cordless Power Tools Black Friday and Cyber Monday Deals

Bare-Tool Makita BJR182Z 18-Volt LXT Lithium-Ion Cordless Reciprocating Saw (Tool Only, No Battery)

Bare-Tool Makita BJR182Z 18-Volt LXT Lithium-Ion Cordless Reciprocating Saw (Tool Only, No Battery)
Click for larger image and other views

>> Click here to update Cheapest prices for Bare-Tool Makita BJR182Z 18-Volt LXT Lithium-Ion Cordless Reciprocating Saw (Tool Only, No Battery) <<

Bare-Tool Makita BJR182Z 18-Volt LXT Lithium-Ion Cordless Reciprocating Saw (Tool Only, No Battery) Feature

  • Variable-speed D35 high-torque motor delivers 0-2,900 strokes per minute
  • 1-1/8-inch length stroke for faster cutting and maximum productivity
  • Compact design at 17-3/4 inches long and 7.7-pound weight for reduced operator fatigue
  • Includes features such as tool-less blade change and shoe adjustments
  • Tool backed by three-year warranty


Bare-Tool Makita BJR182Z 18-Volt LXT Lithium-Ion Cordless Reciprocating Saw (Tool Only, No Battery) Overview

LXT Lithium_ion battery and optimum charging system produces 280% total lifetime work with 2x more cycles. Makita built, D35 high torque motor delivers 50% faster cutting with a 1-1/8" stroke that cuts 2,900 SPM. Compact design at only 17-3/4" length and weighs only 8.1 lbs. for less operator fatigue. Ergonomic shape fits like a glove with even pressure and easy control. One-handed, fast tool-less blade changes and shoe adjustments. Two-piece armature and field along with externally accessible brushes for serviceability and longer motor life. 3-year warranty on tool and 1-year warranty on battery

Bare-Tool Makita BJR182Z 18-Volt LXT Lithium-Ion Cordless Reciprocating Saw (Tool Only, No Battery) Specifications

Makita's 18V LXT Lithium-Ion Cordless Reciprocating Saw delivers faster cutting and demolition performance to the jobsite. The BJR182Z has a high-torque motor with a 1-1/8-inch stroke that is engineered for a range of cutting and demolition tasks. The LXT Lithium-Ion Battery (sold separately) makes this reciprocating saw perfect for remote use, where running a cord is not an option.



View larger
BJR182Z Features
SPEED - 50% faster cutting from 2,900 SPM (1-1/8" stroke)
CONVENIENCE - "Tool-less" blade change and shoe adjustments
COMFORT - Less weight with comfortable ergonomic grip
PERFORMANCE - LXT Li-Ion batteries charge in 30 minutes, run longer and deliver 2.5X more cycles
Battery and charger not included

Tool Specifications
Length of stroke1-1/8"
Max. cutting depthPipe (5-1/8"), Wood (10")
Strokes per minute0-2,900 SPM
Battery18V LXT Lithium-Ion
Overall length17-3/4"
Net weight7.7 lbs. (w/battery)
Makita-Built Motor Engineered for Versatile Power
The BJR182Z features a Makita-built high-torque motor with a 1-1/8-inch stroke that cuts 0-2,900 strokes per minute (SPM) for faster cutting. The BJR182Z has a maximum cutting depth of 5-1/8 inches for pipe, and 10 inches into wood (using a 12-inch blade). The BJR182Z also features an electric brake for productivity.

Ergonomic Design in a Compact Size
The BJR182Z weighs just 7.7 pounds (with battery, sold separately) with a more compact design at 17-3/4 inches long and an ergonomic shape that fits like a glove for reduced operator fatigue.

Versatile Design for a Range of Applications
The BJR182Z is engineered for the pro that wants more features, and is perfect for a range of applications including plumbing, flooring, electrical, demolition, and for general contractors who require a best-in-class engineered cordless reciprocating saw. The BJR182Z is just another example of Makita's commitment to innovative technology and best-in-class engineering.

About Makita's 18V LXT Lithium-Ion Cordless Tool Series
As one of the pioneers driving the cordless tool revolution, Makita changed the game with its breakthrough 18V LXT Lithium-Ion Cordless Series. Three years after its debut, Makita's LXT Series has grown from seven to over 35 tools, providing a wide range of cordless solutions for professional tradesmen. Makita also added 18V Compact Lithium-Ion for cordless power in a more compact size.

About Makita
Makita is a worldwide manufacturer of industrial quality power tools, and offers a wide range of industrial accessories. Makita applies leading-edge innovation to produce tools that are stronger, lighter, more powerful and easier to use. Makita USA, Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit the website at makitatools.com. Makita is Best in Class Engineering.

Warranty
Every Makita Lithium-Ion tool is backed by Makita's 3-Year Warranty that covers repair due to defects in materials or workmanship up to three years from the date of original purchase. Makita Lithium-Ion batteries and chargers have a limited 1-year warranty. Please see makitatools.com for complete details.

What's in the Box
Makita BJR182Z 18V LXT Lithium-Ion Cordless Reciprocating Saw (tool only).


Other Makita Lithium-Ion Series
More 18V Lithium-Ion Tools from Makita
See the entire 18V Lithium-Ion Lineup
Driver-DrillsImpact DriversImpact Wrenches
BHP454BDF451BDF452BDA350BTD144BTW450BTW251BTL063
ConcreteMetalworkingCombo Kits
BHR240BCS550BPB180LXT1500 15-Tool KitLXT1200 12-Tool KitLXT902 9-Tool Kit



SAVE NOW on the special offers below!

Available In Stock.

This Bare-Tool Makita BJR182Z 18-Volt LXT Lithium-Ion Cordless Reciprocating Saw (Tool Only, No Battery) ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Bare-Tool Makita BJR182Z 18-Volt LXT Lithium-Ion Cordless Reciprocating Saw (Tool Only, No Battery)

Order Now Bare-Tool Makita BJR182Z 18-Volt LXT Lithium-Ion Cordless Reciprocating Saw (Tool Only, No Battery) Best Price at Amazon.com